Sunday, April 22, 2012

Hair Bows, Two Ways

Knitting Patterns for Hair Bows

Two Ways to Knit Hair Accessories



After dyeing some yarn yellow with turmeric (see tutorial here) I had to come up with something to do with it.  I decided to knit some hair bows because I thought the yellow would go well with my dark hair.  I made up the patterns as I went along and here I am to share them with you!  I've never written a knitting pattern before, so feel free to make suggestions for changes.

Hair Bows, Two Ways

You will need for both patterns:
A small amount of light weight yarn (sock or sport works well)
Set of 4 DPNs of an appropriate size (this chart has great recommendations), I used 3mm
Yarn needle
Alligator clip or bobby pins

Both bows are knit in two pieces: a body and a center strap.  Finishing instructions differ for the two bows. Seed Stitch Bow is knit flat for both pieces while Stockinette Bow is knit in the round for the body and flat for the center strap.

Seed Stitch Bow




Make body of bow as follows:

Using two needles, cast on 7 stitches.

Row 1: k1, p1, k1, p1, k1, p1, k1

Repeat Row 1 until work is double the desired length of hair bow.  Mine was about 18 cm (7 in) long.  Bind off.


Make center strap as follows:

Using two needles, cast on 5 stitches.

Row 1: k1, p1, k1, p1, k1

Repeat row until strap is desired length.  To check, wrap around the middle of the body.  The strap should gather the bow so should be tight around it.  Mine was about 5.5 cm (2 in) long.  Bind off.

Finishing:

Seam together cast-on and bind-off rows of body.  Lay body flat so that the seam is in the middle of the back.  Wrap strap around the center of the body, over the seam, and seam together cast-on and bind-off rows.  Weave in ends.  If you have an alligator hair clip, you can sew or hot-glue it onto the back.  If not, use bobby pins to secure bow in hair.


Stockinette Bow


Make body of bow as follows:

Using two needles, cast on 14 stitches. Distribute stitches onto three needles and join to knit in the round.  Place marker to indicate end of round.

Round 1: knit to end of round

Repeat Round 1 until work is double the desired length of hair bow.  Mine was about 19 cm (7.5 in) long.  Bind off.



Make center strap as follows:

Using two needles, cast on 5 stitches.

Row 1 (RS): knit to end
Row 2 (WS): purl to end

Repeat rows 1 and 2 until strap is desired length.  The center strap will not be used to gather the bow very much so should be as long as double the width of the body.  My body was 3 cm (1 in) wide so my strap was 6 cm (2 in) long. Bind off.

Finishing:

Seam together cast-on and bind-off rounds of body.  Lay body flat so that the seam is in the middle of the back.  Using scrap yarn, gather body around the middle using running stitch (good tutorial here). Wrap strap around the center of the body with WS down, over the seam, and seam together cast-on and bind-off rows.  Weave in ends.  If you have an alligator hair clip, you can sew or hot-glue it onto the back.  If not, use bobby pins to secure bow in hair.





No comments:

Post a Comment

Thank you for your interest and input! We get embarrassingly excited to receive comments.